Dosing / Filling Software function present in some types of weighing instruments. This mode performs precise weighing of load for the reference mass. In some solutions it is possible to determine the thresholds for measured mass. It is very important to have the filters (reaction time and mass increase) properly adjusted when working in dosing / filling mode. Sensitivity drift Small change of indication of weighing instrument caused by change of external conditions, like: temperature, time, wearing out of elements. New Approach Directives Twenty five directives determining the basic requirements which should be met by instruments introduced to market of European Community. The manufacturer must determine which of all directives refer to a product and should include these directives when designing the product. Directives of New Approach refer to three types of non-automatic weighing instruments: - EMC Directive (Electromagnetic Compatibility); - LVD Directive (Low Voltage Electrical Equipment); - NAWI Directive (Non-Automatic Weighing Instruments). Dryling profiles Determine the way of drying of sample In moisture analyzers with graphic display: - Mild profile: slow but steady reaching set temperature with reference to set time (time in which the set temperature is to be reached). - Step profile: determining two temperature thresholds (so called steps) for drying sample, where the second step is the upper limit for drying procedure. Moisture analyzer WPS 50SX requires to set the time of temperature increase in each of the steps. - Standard profile: lamps warm the drying chamber steadily and in the final stage the heating is activated periodically. - Fast profile: fastest heating of sample with full power of halogens.

©2005 RADWAG. All rights reserved. All proprietor's rights do the materials placed in the server are in possession of Zaklad Mechaniki Precyzyjnej RADWAG and are not to be copied, processed and utilized in commercial purpose unless agreed with Z.M.P. RADWAG.